Oak Versailles parquet in a spacious salon

Versaillesparquet

Parquet nobility.

In a Versailles panel, a border frame and a diagonal lattice are assembled into a square whose pattern brings historic dignity to a room. The panels come in two sizes, with or without a bevel.

Finnish quality

A panel that carries history.

The Versailles pattern was created in the late 17th century for the halls of the Palace of Versailles. The ready-assembled panels are laid side by side, and their lattices run on from panel to panel in one continuous pattern.

We make Versailles panels in Finland in two sizes, 1,000 × 1,000 mm and 800 × 800 mm, with a standard 4 mm wear layer, with or without a bevel. We also make Versailles and other panel designs for restoration projects that follow the Finnish Heritage Agency’s guidelines.

Read more about parquet construction
Large panel
1,000 × 1,000 mm
Small panel
800 × 800 mm
Wear layer
4 mm
Construction
Two-layer or solid
Edges
Bevelled or square
Versailles panel dimensions: 1,000 × 1,000 mm or 800 × 800 mm; a frame round the edges, a diagonal lattice inside1,000 / 800 mm1,000 / 800 mmFrameLattice
A frame runs round the edges of the panel, and inside it the strips form a diagonal lattice. Size 1,000 × 1,000 mm or 800 × 800 mm. Schematic, not to scale.

Bevel

With a bevel or without?

A bevel is a narrow chamfer along the edges of each piece. Bevelled joints show as fine grooves that bring out the geometry of the panel; without a bevel the surface is smooth and continuous, like the floors of old manor houses.

Corner of a Versailles panel with a bevel: the joints show as fine grooves

With a bevel

The joints show as fine grooves.

Corner of a Versailles panel without a bevel: the joints are barely noticeable

Without a bevel

The joints are barely noticeable.

Illustrations: oak, natural tone.

Species and tones

Grand and dark or light?

Versailles parquet is made in oak — other species on request — in several grades and an unlimited choice of tones. A dark tone brings out the grandeur of the lattice, a light one brings the panels into a modern interior.

Try Versailles parquet in your own room

A tone of your own on request. We can also tint Versailles parquet to match your wishes. Tell us your wish

Surface finish

Every tone is finished at the factory. As standard we offer two UV-cured finishes — hard-wearing and effortless to care for.

  • Standard

    UV hardwax oil

    A hard-wearing, dirt-repellent surface cured with UV light at the factory. The floor is ready to use as soon as it is laid.

  • Standard

    UV oil

    A naturally matt surface that brings out the feel of the wood. Care is trouble-free: regular cleaning and maintenance oil when needed.

  • On request

    Oxidative hardwax oil

    A traditional hardwax oil that cures through contact with air. Other finishes are possible too — just ask.

Let’s start planning

Order a sample or request a quote.

We will help you find exactly the right solution for your project.