Dark oak square parquet in a salon with a tiled stove

Squareparquet

Töölö, Norrmen, Salvos and Halla.

In square parquet, blocks of strips alternate at right angles to form a calm, timeless pattern — as natural in the renovation of a period home as in a new build.

Finnish quality

A calm square, a timeless rhythm.

Each square is made of parallel strips, and neighbouring squares alternate in direction. The traditional Töölö square is laid straight; in Norrmen square the field is laid at 45 degrees and framed by a wide border frieze.

We make square parquet in two sizes, 300 × 300 mm and 400 × 400 mm, with a 4 mm wear layer. It comes factory-finished, or unfinished for sanding and finishing on site.

Read more about parquet construction
Square size
300 / 400 mm
Wear layer
4 mm
Finish
Factory or on site
Construction
Two-layer or solid
Square parquet dimensions: 300 × 300 mm or 400 × 400 mm squares with alternating direction300 / 400 mm
Each square is made of parallel strips, and neighbouring squares alternate in direction. Size 300 × 300 mm or 400 × 400 mm. Schematic, not to scale.

Square designs

Four squares, four characters.

From the traditional Töölö and Norrmen squares to Salvos in pine and Halla in birch — each design has its own rhythm.

Töölö square

Töölö square

A square of parallel strips that alternates in direction — a classic of Helsinki homes.

Try it in the Floor Designer
Norrmen square

Norrmen square

The square field laid at 45 degrees and framed by a wide border frieze.

Salvos

Salvos

In pine: a frame round each square, with alternating blocks inside.

Try it in the Floor Designer
Halla

Halla

In birch: plain squares with alternating grain direction.

Try it in the Floor Designer

Species and tones

Light, natural or dark?

Square parquet is made in oak, ash, pine or birch — Salvos in pine and Halla in birch — in several grades and an unlimited choice of tones.

Try square parquet in your own room

A tone of your own on request. We can also tint the parquet to match your wishes. Tell us your wish

Surface finish

Every tone is finished at the factory. As standard we offer two UV-cured finishes — hard-wearing and effortless to care for.

  • Standard

    UV hardwax oil

    A hard-wearing, dirt-repellent surface cured with UV light at the factory. The floor is ready to use as soon as it is laid.

  • Standard

    UV oil

    A naturally matt surface that brings out the feel of the wood. Care is trouble-free: regular cleaning and maintenance oil when needed.

  • On request

    Oxidative hardwax oil

    A traditional hardwax oil that cures through contact with air. Other finishes are possible too — just ask.

Let’s start planning

Order a sample or request a quote.

We will help you find exactly the right solution for your project.